Fiber laser cutting machines maintenance guide - 4 Points

Fiber laser cutting machines maintenance guide - 4 Points

Fiber laser cutting machine maintenance for so long, is it possible that the maintenance direction is wrong? In actual maintenance, are we doing the right thing? Xiaobian thinks that the maintenance of the fiber laser cutting machine is an important part of the machine's operation life, and these four points must be understood!

1. Maintenance with fiber laser cutting machine - optical system

After running for a period of time, the surface of laser lens will be covered by dust, which will greatly affect the reflectivity of each lens, thus affecting the laser output power
Rate. So the dust on the lens must be dealt with. But be careful, the lens is vulnerable, so it should be handled with care, not free to clean.

2. Maintenance of fiber laser cutting machine - dust removal system

When it comes to the maintenance of dust removal of laser lenses, we must mention the maintenance of dust removal heartache. The fan is the core of the dust removal system, which is generally affected by ash deposition due to insufficient suction or poor exhaust. Before cleaning the fan, first turn off the power supply, remove the air inlet pipe and air outlet pipe of the fan, and then remove the dust inside.

3. Maintenance of fiber laser cutting machine - rotation system

The rotating system is equivalent to human hands and feet. If the rotating system is limited, it will affect the normal operation and use of the equipment. Long term operation of guide rail frame will cause wear. The wear of this kind of precision parts will inevitably affect the whole fiber laser cutting machine, and even other gears. The lubricating oil can be applied properly and replaced in time.

4. Maintenance of optical center laser cutting machine working environment requirements

Working in the polluted environment for a long time, people will feel uncomfortable, so will the fiber laser cutting machine. In summer, the fiber laser cutting machine should be maintained
Ventilation, control of indoor temperature. Winter to pay attention to antifreeze, the right environment can have good maintenance effect, "laser cutting machine winter antifreeze detailed introduction" has a detailed description.

After reading the above content, the maintenance direction of fiber laser cutting machine can be more clear, so as to avoid wasting energy.