Quality methods for the hydraulic punching and shearing machine

Quality inspecting methods for the hydraulic punching and shearing machine

First of all, the surface of the knife board of the equipment should not be uneven, and the junction of the door and the cover should be leveled. All components must be built-in and painted. The painted surface must be flat and clean, with well-proportioned color, and free of wrinkles and appendages.

Secondly, grease should be added to the transmission gear. Move the knife board by hand to check whether each part can operate normally. If there is no problem, you can start a high-voltage electric shock, check whether it can run at a high speed, and check whether the temperature of the rolling bearing is less than 63 degrees in two to four hours.

Hydraulic punching and shearing machine and mechanical profile punching and shearing machine combines punching, shearing angle steel cutting, profile cutting and other capabilities. Hydraulic punching and shearing machine has the advantages of light weight, small size and low noise. It is a modern machinery manufacturer. For example: ideal equipment for metallurgy, bridges, communications, electric power and other industries. In order to meet the needs of real production, the new type of combined punching and shearing machine is independently designed with a multi-capacity hydraulic combined punching and shearing machine in order to reach the net surface more neatly, smoothly, beautifully, with small ribs and high added value.