Key points of hydraulic shearing machine safety management

Key points of hydraulic shearing machine safety management

Doing a good job in the safety management of hydraulic shearing machine is the basic condition to ensure the production efficiency of the enterprise. Only by doing a good job in safety management can the basic conditions for efficient production be obtained. Let's take a look at the key points of safety management of hydraulic shears.

1. Be sure to check whether the wire is damaged, whether the wire end is exposed, and whether the light is sufficient before starting the machine every day.

2. When picking and placing products, it should be carried out after the tool post is up and stable, and pay attention to the sliding of the tool and hurt your hands.

3. The equipment can be repaired and maintained only after the power is completely cut off to avoid electric shock.

4. During the operation of the equipment, the operator should keep a safe distance from the equipment. It is strictly forbidden to extend any part of the body into the tool part. Only one person is allowed to step on the foot switch when operating the machine.

5. Clean up the oil around the equipment in time to prevent slippage.

6. The placement of products, waste bins, tools, etc. should be standardized, and it is strictly forbidden to place or close any items inside or outside the machine, inside and outside the electric control box, and on the machine table.

7. The operator's operating area and operating activity space should be sufficient, and lighting must be provided at night to meet the requirements of the operator's normal operation and evacuation in emergency situations.